Tama Star Maple kit review

Image 1 of 2

Tama Star Maple kit review

Rear

Tama's erstwhile flagship Starclassic has been around for 20 years, so you might say the Star series is overdue. Tama has restricted the Star options to two major wood types - bubinga and maple. Maple of course is a traditional North American staple and it's that drum set we're looking at here.

Having learned much during the Starclassic years, Tama reveals that the primary goal with the Star was to re- examine every detail "to enhance shell resonance". This has led to some interesting solutions and surprising retro features, as we shall see.

Build

We have a full kit, finished in Satin Antique Brown and consisting of a 22"x14" bass drum, 10"x7" and 12"x8" mounted toms, 14"x14" and 16"x16" floor toms with matching 14"x51⁄2" snare. The finish is sensational and the satin stained rich brown maple looks and feels glorious.

Interestingly Tama has opted for vintage-style extra-thin shells with Sound Focus (reinforcing) Rings. The maple is 5mm and 5-ply with SFRs of the same. The five plies consist of a 2mm thick solid wood core ply, sandwiched between 1.5mm thick cross-laminated plies either side.

The review drums have the attractive inlay feature previously seen on the Starclassic bubinga. There are three options - the standard being for an inlay around each drum's circumference. But you can also have the inlay on the inside, around the Sound Focus Rings. Or simply have no inlay at all. The inlay, by the way, incorporates the Star winged logo badge. No resonance-killing metal badges for these babies - even the air holes are wood (not metal) grommets.

Removing heads reveals the maple running horizontally inside. Another nod in the vintage direction sees Tama rounding off its bearing edges (unlike the sharp edges of modern drums), allowing broader contact between the head and shell. And there is also a substantial outer cut so that the edge peaks 3.5mm in, further towards the centre of the drum than usual. This also increases head-to-shell contact.

Bearing edges are painstakingly cut, perfectly level and hand-finished with oil. The review maple bass drum has Natural Matte maple hoops which contrast with the Satin Antique Brown of the rest of the kit. A further alternative is for Dark Brown Matte hoops. No? Okay, you can have hoops matching the shell if preferred.

Not all the ruses designed to extract maximum resonance are vintage. While the supported shells have a classic vibe, the metal work is in keeping with Tama's impressive record at the forefront of hardware design. Toms and bass drum have a new cast lug, a bridged design for minimal shell contact with an attractive curvy shape and four-faced ridges. Hoops are die-cast zinc, more consistent and structurally solid than triple-flangers. And aiding the hoops are Hold Tight washers, which have a stainless steel cup containing a rubber ring. This prevents de-tuning under modern heavy playing.

Likewise, when it comes to tom mounting technology we have come a long way from earlier crude designs. With the aim always to reduce stress and enhance resonance, Tama's Super Resonant Mounting System is innovative and clever. Most isolation mounts attach to the upper lugs of the tom, which inevitably puts stress on the tuning bolts and lugs. So Tama has radically re-designed the die-cast batter hoop to avoid this by including additional ears for mounting, extra to the normal ears through which you slip the tension rods. The three-point mount system has two outer points on the batter hoop, which float on rubber sleeves and support the vertical weight of the drum.

A third, central point leans against the lower hoop at the end of a vertical support arm. If the drum is mounted at a severe angle, the top end of this arm comes into play, which is slotted inside a third, central, ear on the batter hoop. Either way, Tama claims that this new design takes considerable stress off the shell.

Both mounted and floor toms also incorporate Tama's second smart innovation, called Quick Lock, which is a combined memory lock and mounting bracket. The memory lock section stays attached to the floor tom leg or the tom bracket arm, secured by the usual wing nut, at your chosen height and angle. Setting up or breaking down, you simply slot this into the suspension mount housing where it is locked in place by a black nylon ring switch.

Tama suggests bass drum spurs fulfil a broadly similar function to floor tom legs. In connecting the drum with the floor and simultaneously stabilising it, the shell's energy can again be compromised. Tama's boffins reasoned that, just as floor tom legs need to be isolated from the tom shell, so should spurs.

Accordingly, Tama has split each spur into two sections separated by a rubber shock absorber so that the forward movement of the drum as you kick your pedal is absorbed by the rubber and the drum's energy is not dissipated into the floor.

Moving on to the snare drum, this also has not escaped the withering eye of Tama's resonance sleuths. There's a new one-piece double-ended bridge lug and there are eight rather than 10 of them, again lightening the load.

Meanwhile, the Linear-Drive snare strainer is a joy. The throw-off is isolated from the shell and on both the strainer and butt sides the strings are brought up at an angle. The linear lever itself has a smart action which locks past the vertical point. The piston tension knob has position clicks so it can't come loose.

Hands On

The retro vibe is properly respected in the 14"-deep bass drum and, being shallow, it responded quickly with a great slam. If you want that classic immediate sound - from Al Jackson to John Bonham to Tama's own funky John Blackwell -you need a 14" deep bass. They look cool too and are easier to transport.

Overall, the drums offer is an astute combination - thin shells which promote resonance of the respective woody timbres and bring out the deeper fundamentals, coupled with Sound Focus Rings which channel the attack.

Rounded edges that mean more of the shell is in contact with the head, allowing the shell tone to make more impact, warming the tone, slightly mollifying the attack and controlling the sustain. But then along come the aggressive die-cast hoops to give stability and make tuning especially easy.

The snares sits perfectly, tonally, with the kits. The Linear-Drive strainer is smooth and silent in action. The usual dip of Tama's snappy snare beds has been levelled out to the extent that so far as we can see there are no snare beds. And it would seem to make no difference, the drums work perfectly.